Pitched Roofing & Ventilation

The flush fitting slate roof vents provide air entry through the roof surface while creating a discreet, neat and aesthetically pleasing finish to the roof scape. The range of slate roof vents are simple to install with minimum cutting of slates. Being manufactured from polypropylene, the slate vent range has the

The flush fitting slate roof vents provide air entry through the roof surface while creating a discreet, neat and aesthetically pleasing finish to the roof scape. The range of slate roof vents are simple to install with minimum cutting of slates. Being manufactured from polypropylene, the slate vent range has the

The CON6+ is a ventilated dry ridge and hip system, providing for full mechanical fixing of ridge and hip tiles, compliant with the requirements of BS 5534, BS 5250 and BS 8612. The ventilated membrane has broader corrugated adhesive edge strips, designed to accommodate a greater range of roof

CLAY6+ is a universal ventilated dry fix ridge and hip system that can be used with all the commonly available clay and baby ridge tiles. Compliant with the requirements of BS 5534, BS 5250 and BS 8612. Our unique, patented gasket features weatherproof, continuous integrated water channels and self-sealing detail

The 3 in 1 ventilation packs provide complete ventilation and a support system, giving additional protection to the fascia detail of all roof types. A unique feature of this system is the universal over fascia vent with two fixing positions that adapt to 10mm and 25mm airflows areas. Installation of the ventilation

The telescopic underfloor vent is designed to be used where the external vent aperture is required to be at a higher level than the underfloor void. The telescopic design gives adjustment from 3 to 5 course height of brickwork (down to 2 if trimmed). Product Code HD 9600M Optional components HD

The vertical extension sleeve is a two course vertical extension sleeve for the HD 9600M. It can be used in multiples to achieve any desired height. Product Code HD 9610/2 Downloads For more info on this product visit our Downloads page to find: Install Recommendations, Datasheets and Compatibility

Designed to extend the reach of the underfloor vent for varying cavity and wall leaf widths. Top Extension Sleeve Product Code: HD 9660T 140mm long for an outer leaf width of up to 170mm Bottom Extension Sleeve Product Code: HD 9660M 155mm long for an

The  brick vents come in standard brick size and permit high levels of ventilation through walls whilst also protecting from driving rain and large insect ingress. When used with the HD 9600M, they provide entry of air into underfloor voids of suspended floors. The bricks can

The square to round adapter is designed to fit the telescopic vent to enable standard 110mm plastic pipes to be connected to allow ventilation to remote underfloor voids. The adapter has an asymmetric design, suitable for use immediately below pre-cast concrete floors. Product Code HD 9620 Downloads For more info on this product

The semi rigid airbrick vent sleeve is designed to ventilate through a standard cavity wall. Accommodates the ‘clip-together’ facility of the HD 9300 air brick to achieve one, two or three brick fitting to suit the application. Product Code and Options HD 9350/1: Single HD 9350/2: Double HD 9350/3: Triple Additional Dimensions HD

The soffit and fascia product ranges provides roofspace ventilation at the lowest level of the roof line. All grille and mesh sizes are designed in accordance with the recommendations within BS5250. These vents help to avoid excessive airflow resistance and prevent the ingress of birds and large