Pitched Roofing & Ventilation

The roofing underlay support tray provides full support and eaves protection for roofing underlay at eaves level. They combine together to provide a drip channel into the guttering while clipping trays together and offers universal rafter spacing. Hinged at fascia to prevent panel distortion on low pitches. It can be fixed with

The rigid underlay support tray is ideally suitable for eaves refurbishment details. This rigid unit provides an immediate and cost effective solution to situations where damage to the underlay has occurred. Product Code HD RFST It can be used in conjunction with either traditional soffit strip ventilator configurations (HD 8000)

The underlay lap ventilator is designed for simple professional or DIY installation from the inside of cold pitched roofs where condensation is a problem. It is designed to fit between the overlaps in the roofing underlay below the tiles or slates to introduce ventilation openings

The continuous GRP eaves course is designed to replace the need to cut slates to form the first support eaves course. For fast installation, offering savings in both time and materials. Being manufactured from GRP, the eaves course has the following benefits; Light in weight

The continuous soaker range offers a secondary line of protection against wind driven rain where the roof meets an abutment wall. Being manufactured from GRP, the continuous soakers have the following benefits; Up to half the cost and time of traditional lead installation Semi-skilled fitting procedure Mortar bonding strip Light

The continuous soaker range offers a secondary line of protection against wind driven rain where the roof meets an abutment wall. Being manufactured from GRP, the continuous soakers have the following benefits; Up to half the cost and time of traditional lead installation Semi-skilled fitting procedure Light in weight and

The continuous soaker range offers a secondary line of protection against wind driven rain where the roof meets an abutment wall. Being manufactured from GRP, the continuous soakers have the following benefits; Up to half the cost and time of traditional lead installation Semi-skilled fitting procedure Light in weight and

Our corbel vent provides air ventilation at eaves level where a continuous masonry corbel of brick, or stone is constructed. The base at the rear of the ventilator has a dovetail anchoring slot which enables security ties to be attached at any position to suit

The Hambleside Danelaw continuous abutment cover flashing is an attractive and cost effective alternative to lead for all roof abutments. Easily trimmed on-site to suit the application, whether directly into brick, render or as a stepped finish. Being manufactured from GRP, the flashing has the following benefits; Up to half the cost and time of traditional lead installation

The damp proof course incorporates a wide mortar bonding strip. It has been specifically developed for sloping parapet wall applications up to 240mm thick. Being manufactured from GRP, the damp proof course has the following benefits; Up to half the cost and time of traditional lead installation Semi-skilled fitting procedure Light in weight

Danelaw LR120 is a high quality low resistance pitched roof underlay for slate and tile roofs suitable for unsupported applications draped over rafters or fully supported over timber sarking or rigid insulation in compliance with the requirements of BS 5534 Slating and tiling for pitched

Danelaw LR120TT is a high quality low resistance roofing underlay for slate and tile roofs suitable for unsupported applications draped over rafters or fully supported over timber sarking or rigid insulation in compliance with the requirements of BS 5534 Slating and tiling for pitched roofs