ThinVerg® Interlocking Dry Verge System

The thin leading edge Interlocking Dry Verge System has been designed to prevent weather ingress and reliance on mortar at the roof edge. Compatible with all large format concrete thin leading edge tile types, and suitable for use on new build or refurbishment.

Product codes

HD THIN

Product Features

• Suits all commonly available single lap concrete tiles between 260mm and 355mm batten gauges
• Designed to minimise water run-off staining on the verge and gable wall
• Clip-over design for fast installation
• Dry fix products eliminate the mortar installation and maintenance issues
• Secure single nail fixing when used with optional batten end clip. No special fixings required
• Universal eaves starter unit for all applications and one discreet colour for use with both ThinVerg® and IDV
• Starter unit designed to avoid gutter interference and slotted for ease of adjustment
• Starter unit and ridge cap kits include stainless steel screws and wall plugs
• Universal angle and half-round ridge end cap options with integral ridge closures
• High heat distortion resistance compared to PVC
• UV stabilised for long term performance
• 15 year guarantee

System Components

• HD THIN – Dry Verge unit
• HD IPTDV/HR – Half round ridge cap
• HD IPTDV/AR – Angle ridge cap
• HD IPTDV/ST – Starter unit
• HD IDV/BC – Batten end clip
• Slate grey dry verges and ridge caps contains 100% recycled PPC

Technical Information

COMPLIES WITH BS 8612

The ThinVerg® Dry Verge System provides a fixing for the verge tiles for use in wind zones 1 to 5 in accordance with BS 8612 Table C.1.